POWDER COATINGS SOLUTIONS

(SIRALES® resins for epoxy-polyester paints)

50/50

PRODUCT ACID VALUE VISCOSITY     TG DESCRIPTION TDS
PE 8205 70-82 800-3000 58 For very high rective powder coatings
PE 8210 68-78 1200-4000 56 For high reactive systems
PE 8212.T 70-80 3000-6000 63 For matt coatings with very good overbaking resistance
PE 8220.T 55-66 2300-4000 56 For medium reactive systems; flow enhanced
PE 8221* 58-68 2200-4000 58 For medium reactive systems; flow enhanced, overbaking electrodomestical appliances
PE 8222* 60-72 1800-3800 55 High reactive systems, electrodomestical appliances
PE 8223* 60-70 2400-4400 54 High reactive systems, good flow, electrodomestical appliances
PE 8231 65-75 2800-4800 58 For low reactive systems, unique flow
PE 8240 60-70 1800-4000 56 High reactive system, good fillers wettability
PE 8242 55-65 2000-4000 58 For medium reactive systems; good fillers wettability
PE 8375 (§) 70-80 800-2000 61 Medium/high reactivity, TMA FREE

* Tribo Version available

(§) Experimental Product

60/40

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 8224 55-66 2300-4000 58 For high reactive system; good overbaking
PE 8225 55-65 2000-4000 53 For high reactive system; good overbaking
PE 8243.T 45-55 3000-5000 55 For high reactivity combined with good mechanical and aesthetic properties.
PE 8253 45-55 1800-4000 52 Prepared with FDA approved raw materials §175.300
PE 8254 50-60 1800-4000 55 For very high reactive systems
PE 8560 50-60 1000-3000 65 For medium reactivity with high filler loading
PE 8344.T (§) 46-54 1500-3500 57 Medium reactivity, TMA FREE

* Tribo Version available

(§) Experimental Product

70/30

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 8423/FT* 30-38 4000-7000 53 With 2% of acrylic flow agent, high reactive systems
PE 8412.T 35-45 3500-6500 54 High reactive systems, good overbaking
PE 8417 32-40 4000-7000 53 Very high reactive systems, good flow
PE 8418.T 30-38 3000-6000 50 High reactive systems; very good flow
PE 8419* 32-40 3500-5500 55 High reactive systems; good flow and mechanical properties
PE 8420* 32-40 3500-5500 52 Medium reactivity, good flow, matt coating with B68
PE 8421* 32-40 3500-5500 54 High reactive systems; good flow and mechanical properties
PE 8422* 28-36 4500-7000 54 Very high reactive systems, good flow
PE 8425.T 30-38 3500-5500 54 High reactive systems; good flow and mechanical properties
PE 8429* 30-38 3000-6000 56 High reactive system, good fillers wettability
PE 8439.T 30-38 3000-6000 56 High reactive systems, for texture coatings
PE 8440 32-40 5000-9000 65 Medium reactivity, good storage stability of powders
PE 8470 32-40 3500-5500 55 Prepared with FDA approved raw materials §175.300

* Tribo Version available

(SIRALES® resins for β-hydroxyalkylamide-cured paints)

95/5

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7807* 30-38 4000-7000 61 Industrial, very high reactivity
PE 7809* 30-38 3000-5500 62 Industrial, high reactivity
PE 7810* 30-38 2750-4750 61 Industrial, very good flow
PE 7811* 30-38 3000-6000 60 Architectural for clear coatings
PE 7812 30-38 3000-6000 58 Industrial/architectural, high reactivity
PE 7813.T 30-38 2000-5000 58 Architectural/industrial, very good flow
PE 7814.T 30-38 3000-5000 65 Architectural/industrial, good flow and storage stability
PE 7816.T 30-38 2000-5000 58 Architectural, good flow and mechanical properties
PE 7817.T 30-38 2500-4500 55 Architectural plus, good flow and mechanical properties
PE 7821.T 30-38 5000-8000 64 Architectural, good storage stability
PE 7827.T 30-38 1500-3500 54 Architectural plus, very good flow
PE 7860 30-38 1500-3500 55 Architectural/industrial, good degassing properties
PE 7870.T 30-38 2500-4500 59 Industrial/architectural, low reactivity resin for structural coatings

* Tribo Version available

96/4

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7111.T 16-24 4500-7500 58 Architectural, good flow and mechanical properties
PE 7112.T 20-28 4500-7500 55 Industrial/architectural very good flow
PE 7113.T 20-28 4500-7500 58 High Tg version of PE 7112.T

* Tribo Version available

97/3

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7204.T 18-24 4500-7000 60 Architectural/industrial good flow and mechanical properties

Low gloss systems (dry-blend technique)

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7201.T 16-24 3500-6500 55 Industrial/architectural for dry blend matt coatings
PE 7203.T 14-20 4000-7000 52 Industrial/architectural for dry blend matt coatings
PE 7202.T 17-23 5500-8500 55 Architectural for dry blend matt coatings
PE 7220.T 46-54 3000-6000 63 Architectural for dry blend matt coatings
PE 7260.T 55-65 1500-3500 58 Industrial/architectural for dry blend matt coatings
PE 7270.T 70-80 500-3000 55 Industrial/architectural for dry blend matt coatings

(§) Experimental Resin

Superdurable systems

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7290 46-54 1500-3000 55 Superdurable resin for 97:3 with HAA
PE 7499 28-36 3000-6000 64 Superdurable resin for 95:5 with HAA
PE 7495 (§) 30-36 1000-2500 55 Flexible superdurable resin for 95:5 with HAA
PE 7500 28-36 3000-7000 53 Superdurable resin for 95:5 with HAA – very high mechanical properties

Low gloss superdurable systems (dry-blend)

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7550 52-58 2500-4500 65 Superdurable, for 93:7 with HAA, low gloss when dry blend with PE 7530
PE 7530 (§) 22-28 2000-4000 62 Superdurable, for 96:4 with HAA, low gloss when dry blend with PE 7550

(§) Experimental Resin

(SIRALES® resins for TGIC-cured paints)

95/5

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7112.T 20-28 4500-7500 55 Industrial /architectural, matt coatings

93/7

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7310 30-38 3500-5500 60 Architectural/industrial, good reactivity, flexible
PE 7315 30-38 3500-6500 55 Architectural/industrial for low temperature systems
PE 7320.A 30-38 3500-5500 68 Industrial, very good storage stability
PE 7321 30-38 3000-5000 65 Industrial/architectural, medium reactivity, good flow
PE 7322 30-38 3500-5500 66 Architectural

90/10

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7220.T 46-54 3000-6000 63 Architectural, chemical resistant, for dry blend matt coatings

* Tribo Version available

(SIRALES® resins for TGIC-cured paints)

95/5

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7112.T 20-28 4500-7500 55 Industrial /architectural, matt coatings

93/7

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7310 30-38 3500-5500 60 Architectural/industrial, good reactivity, flexible
PE 7315 30-38 3500-6500 55 Architectural/industrial for low temperature systems
PE 7320.A 30-38 3500-5500 68 Industrial, very good storage stability
PE 7321 30-38 3000-5000 65 Industrial/architectural, medium reactivity, good flow
PE 7322 30-38 3500-5500 66 Architectural

90/10

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7220.T 46-54 3000-6000 63 Architectural, chemical resistant, for dry blend matt coatings

* Tribo Version available

(SIRALES® resins for PT-910-cured paints)

93/7

PRODUCT ACID VALUE VISCOSITY    TG DESCRIPTION TDS
PE 7901* 24-32 6500-10000 70 Architectural

* Tribo Version available

(SIRALES® resins for polyurethane paints)

PRODUCT HYDROXYL VALUE VISCOSITY    TG DESCRIPTION TDS
PE 6110 35 – 45 4500-7500 60 Architectural in combination with aliphatic isocyanate

(special SIRALES® resins)

PRODUCT ACID VALUE HYDROXYL VALUE VISCOSITY    DESCRIPTION TDS
PE 6210 F 8 max 35 – 50 1500-3500 Masterbatch with 10% of flow agent, suitable for outdoor
PE 6215 F 8 max 35 – 50 1200-3200 Masterbatch with 15% of flow agent, suitable for outdoor
PE 6310 F 8 max 35 – 50 1500-4500 Masterbatch with 10% of flow agent, suitable for clearcoat
PE 6220 8 max 65 – 85 500-2500 For masterbatches of additives and pigments, organic filler
PE 5900 28-36 1500 Crystalline resin, plasticizers for superdurable system
PE 7400 30-38 2500-5500 Masterbatch of 5% of tribo additive

EPOSIR®

Advancement process

PRODUCT EPOXY EQUIVALENT
(g/eq.)
EPOXY GROUP CONTENT
(mmol/kg)
VISCOSITY
at 25°C (mPa.s)
DESCRIPTION TDS
7161 460-520 1923-2174 F-I Type-1. Low MW
7165 540-620 1612-1851 G-M Higher MW version of 7161 with higher melting point
7166 PG 570-620 1612-1754 H-M Low MW epoxy for powder coatings
7167 PG 600-660 1515-1667 H-P Type-2. Low MW for powder coatings
7168 PG 650-720 1389-1538 K-R Type-2,5. Low MW for powder coatings
7175 PG 710-780 1282-1408 M-U Type-3. Low MW for powder coatings
7178 PG 770-840 1190-1298 O-U Type-3,5 for powder coatings
7170 PG 800-900 1111-1250 Q-V Type-4. Medium MW
7179 1100-1250 1100-1250 V-Z Special grade. Higher MW. For coatings and cataphoresis. In powder coatings it is used in blend with standard epoxy for increasing flexibility and adhesion

EPONAC®

Taffy process

PRODUCT  EPOXY EQUIVALENT
(g/eq.)
EPOXY GROUP CONTENT
(mmol/kg)
VISCOSITY
at 25°C (mPa.s)
DESCRIPTION TDS
5007 HMP 500-550 1818-2000 F-J Type-1 low MW epoxy. Higher melting point. Better syntherization epoxy
600 600-700 1428-1667 H-M Type-2. Low MW
615 650-720 1389-1538 J-O Type-2,5. Low MW
700 700-760 1316-1428 L-Q Type-3. Low MW
825 730-830 1204-1370 N-T Type-3. Low MW
945 820-950 1052-1220 Q-V Type-4. Medium MW
2055 1300-1800 556-769 W-Z Type-6. High MW
2065 1500-2000 500-666 X-Z Type-7. High MW
3075 2000-2800 357-500 Z+1/2-Z3 Type-8. High MW
4085 2500-3500 286-400 Z2-Z5 Type-9. High MW

Hardener for Powder Coatings

PRODUCT APPEARANCE MELTING RANGE        HYDROXYL EW (G/EP) DESCRIPTION TDS
411 white flakes 116 – 126 °C 84-88 Based on β-HAA it is suitable for production of outdoor powder coatings with a very high weathering resistance
H white flakes 120 – 126 °C 84-88 Based on β-HAA it is suitable for production of outdoor powder coatings with a very high weathering resistance
H30A white flakes 80 – 100°C 270-290 Masterbatch 30% β-HAA hardener with outdoor polyester resins
H50A white flakes 80 – 100°C 170-180 Masterbatch 50% β-HAA hardener with outdoor polyester resins

Phenolic hardeners for pure epoxy powder coatings

PRODUCT GARDNER VISCOSITY AT 25°C MELTING RANGE       HYDROXYL EW (g/eq) REACTIVITY TG DESCRIPTION TDS
VP 2080 H-M 60 – 70°C < 250 +/- 30 ‘+’ 54 Phenolic Hardener based on unmodified solid reaction product of liquid epoxy resin
(LER) and BPA containing a polyacrylate flow modifier and curing accelerator. Designed for Powder Coating is totally compatible with Epoxy Resins.
Preferred application for good flow decorative, protective and high gloss powder coating.
Moderate reactivity.
Read more

VP 2081 H-M 60 – 70°C < 250 +/- 31 ‘++’ 50 Phenolic Hardener based on unmodified solid reaction product of liquid epoxy resin
(LER) and BPA containing a polyacrylate flow modifier and curing accelerator. Designed for Powder Coating is totally compatible with Epoxy Resins.
Preferred application for good flow decorative, protective and high gloss powder coating.
Medium reactivity.
Read more
VP 2082 H-M 60 – 70°C < 250 +/- 32 ‘+++’ 50 Phenolic Hardener based on unmodified solid reaction product of liquid epoxy resin
(LER) and BPA containing a polyacrylate flow modifier and curing accelerator.  Designed for Powder Coating is totally compatible with Epoxy Resins. Can be formulated into protective or decorative powder coating. Relative high reactivity.
Read more
VP 2083 H-M 60 – 70°C < 250 +/- 33 ‘++++’ 47 Phenolic Hardener based on unmodified solid reaction product of liquid epoxy resin
(LER) and BPA containing a polyacrylate flow modifier and curing accelerator. Designed for Powder Coating is totally compatible with Epoxy Resins. Very high reactivity.
Read more
VP 2084 H-M 60 – 70°C < 250 +/- 34 ‘++’ 50 Phenolic Hardener based on unmodified solid reaction product of liquid epoxy resin
(LER) and BPA containing curing accelerator.
Designed for Powder Coating is totally compatible with Epoxy Resins. Can be formulated into protective or decorative powder coating. Medium reactivity.
Read more
VP 2085 H-M 60 – 70°C < 250 +/- 35 ‘++++’ 52 Phenolic Hardener based on unmodified solid reaction product of liquid epoxy resin
(LER) and BPA. Designed for Powder Coating is totally compatible with Epoxy Resins. Can be formulated into protective or decorative powder coating. The product contain no curing accelerator and no flow modifier. It is useful for optimizing the reactivity of powder coating formulation which already contain a curing accelerator
Read more
PRODUCT APPEARANCE MELTING RANGE          PARTICLES SIZE DESCRIPTION TDS
VP 1016 light yellow flakes 105 – 117 °C < 2 mm Matting agent for outdoor powder coatings based on triglycidylsocyanature and epoxy/polyester hybrids
VP 1035 light yellow flakes 80 – 100 °C < 180 μm Matting agent for outdoor powder coatings based on epoxy/polyester hybrids
VP 1110 white flakes 80 – 100 °C < 2 mm Accelerator to increase the reactivity in hybrids, polyester/TGIC, polyester/epoxy ester
VP 1115 white flakes 80 – 100 °C < 8 mm Additive indicated to prevent yellowing of powder coatings during curing in presence of N0x (gas oven)